Return

ZBL-P8100 Foundation Pile Dynamic Detector

Field of use:By using the reflected wave method, the apparatus is used to assess the integrality of concrete pile and identify the extent and location of the pile defect. It can be used for testing perfusion pile and hammer pile. It can also be used for testing the exposed top surface of constructions such as pillars.
Configurations:P8100ICP Accelerated transducerHammerWaterproof case
By using the reflected wave method, the apparatus is used to assess the integrality of concrete pile and identify the extent and location of the pile defect. It can be used for testing perfusion pile and hammer pile. It can also be used for testing the exposed top surface of constructions such as pillars.


Item Specifications Item Specifications
Control Mode A8 Embedded platform Monitor 5.4 inchhigh brightnessTFT  Color LCD
Data storage 4GB Operation Mode key+Touch screen
Trigger Signal trigger Ports USB port
Noise voltage of the system ≤1 mV Dynamic range ³184 dB
Amplifier frequency range 10Hz10kHz Input impedance ³1 MW
Sampling time intervals 1µs64ms adjustable Time resolution 5µs
Max length of sampling 4096 Gain error ≤1 dB
Amplitude nonlinear degree ≤10% Timing accuracy ≤1%
    Sentinel magnify (time) 125102050100adjustable
A/D resolution 24 bit Max magnify (times) 256000
Number of channels 2 Transducer sensitivity ³100 mv/gacceleration mode
Frequency range of Transducer 0.5~9000 Hzacceleration mode Continuous operating hours >5 hrs
Interference between channels ≤1% Power AC220V±10%DC:+12V
Dimensions 210mm´149mm´60mm Weight 1.3kglithium battery included
Software interface
Side bar navigation